Self-Clinching Pilot Pins TPS

Self-Clinching Pilot Pins TPS

Self-Clinching Pilot Pins TPS • Self-clinching • Unthreaded • Installed quickly and easily in metal panels by squeezing into place with the standard press • Creates flush-head assembly • High push-out resistance • Chamfered end- easy locating of mating hole • The minimum sheet thickness of...
Chat Now

Product Details

Self-Clinching Pilot Pins TPS


• Self-clinching    


• Unthreaded    


• Installed quickly and easily in metal panels by squeezing into place with the standard press


• Creates flush-head assembly    


• High push-out resistance


• Chamfered end- easy locating of mating hole    


• The minimum sheet thickness of 0.040"/ 1.00 mm


Self-clinching studs are installed by placing them in properly sized holes in the sheets and squeezing into place with any standard press. The squeezing action embeds the head of the stud into the sheet. 


The metal displaced by the head flows smoothly and evenly around the ribs and into the annular groove - creating a flush head assembly and securely locking the stud into the sheet with high torque-out and pushout resistances.

Name: TPS positioning pin, the guide pin


Material: SUS303 stainless steel


Specifications: attached


Uses: Pressing and riveting on the thin plate, the other end is positioned or guided.


Application: Guide pin is widely used in many aspects such as positioning device, rotating center and linear alignment. The end chamfer makes the matching hole easy to install.


The standard TPS pin material is stainless steel SUS303, the left picture is aluminum, and customized according to customer requirements.


More TPS positioning pins of other materials, such as carbon steel, brass, aluminum, etc., can be born, please contact us.


Inquiry