FH Unthreaded Flush Head Studs Self Clinching

FH Unthreaded Flush Head Studs Self Clinching

Flush Head Unthreaded Studs - Types FH, FHS, FHAFH_InstalledSelf-Clinching Pins - Type FH, FHS, FHA 2 Self-clinching studs are installed by placing them in properly sized holes in the sheets and squeezing into place with any standard press. The squeezing action embeds the head of the stud into...
Chat Now

Product Details

Flush Head Unthreaded Studs - Types FH, FHS, FHAFH_InstalledSelf-Clinching Pins - Type FH, FHS, FHA 2

Self-clinching studs are installed by placing them in properly sized holes in the sheets and squeezing into place with any standard press. 


The squeezing action embeds the head of the stud into the sheet. The metal displaced by the head flows smoothly and evenly around the ribs and into the annular groove – creating a flush head assembly and securely locking the stud into the sheet with high torque-out and pushout resistances.


FH unthreaded flush-head studs are available in aluminum, steel, or stainless steel. They are also available unthreaded on special order.


Flush-head for the sheet thickness of 1.00 mm and greater.


Type FH is recommended for use in steel or aluminum sheets HRB (Rockwell “B” Scale) 80 or less and HB (Hardness Brinell) 150 or less.


Type FHS is recommended for use in steel or aluminum sheets HRB (Rockwell “B” Scale) 70 or less and HB (Hardness Brinell) 125 or less.


Type FHA is recommended for use in aluminum sheets HRB (Rockwell “B” Scale) 50 or less and HB (Hardness Brinell) 82 or less.


TB28g2yIFmWBuNjSspdXXbugXXa_!!2986725247



  • 1 Other pin diameters can be specified.


  • 2 Pin diameter may exceed max. in this region.



• Self-clinching    


• Unthreaded  

   

• Installed quickly and easily by squeezing into place


• Creates flush-head assembly     


• Stud locked into place


• The minimum sheet thickness of 0.040" / 1.00 mm



Inquiry